• Home
• About
• Contact Us
• Disclaimer
• Privacy Policy
• RSS

Best Engine Performance

Driving a car is not only arriving at destination on time. Driving a car means pride. Pride of driving a good car with humming engine on the road and that is great feeling. But most of us who own car are often deal with bad sounded engine which is humiliating. Indeed, old car will sound bad and otherwise new car is not. But that is does not mean you should change your old comfortable car just because it sounds bad, you can enhance your old car performance instead of sell it.

At Carid.com, you can find cold air intake. This thing is to make your hot air in your engine turn into cold air and will make your engine sounded well. With the cold air inside your engine, your engine will be better than before and the performance will be better too. Well, the cold air will change the hot air and will bring more oxygen to the engine. The engine will run better and you will drive safe and sound.

You will not humiliating yourself anymore if you use cold air intake. So, visit this website and buy cold air intake here. Beside cold air intake, you can also buy air filter to safe your engine.

Practical Guidelines for Building Earthquake Resistant Houses (III)

MAIN: PRINCIPLES-PRlNSIP EARTHQUAKE RESISTANT CONSTRUCTION

1. Plan a simple and symmetrical

Investigation of damage caused by the earthquake showed the importance of building a simple layout and structural elements resisting horizontal forces are symmetrical. These structures can withstand earthquake forces Iebih either because of lack of effect of torque and a more equitable kekekuatannya.

2. Building materials should be as light as possible

Often, therefore ketersedianya certain building materials. Architects and Scholars SipiI must use a heavy building materials, but if maybe you should wear a lightweight building materials. This is due to the large earthquake inertial load is proportional to the weight of construction materials. As an example of the tile roof coverings over wooden horses produce horizontal seismic load for 3 x load generated by the earthquake of zinc roofing on wooden horses. Similarly, couples menghasiIkan brick wall for 15 x seismic force generated by the earthquake load timber wall.

3. Need for the construction of the anchoring system of sufficient weight

So that a building can withstand an earthquake, seismic inertial forces should be channeled from each structural element to the main structure honisontal style which then move these forces to the foundation and onto the ground.

It is very important that the main structure of the horizontal force resisting it is chewy. Because, if the elastic force being exceeded, brittle failure which is suddenly not going to happen, but in some specific places Ieleh occurred first.

An example of such deformation of the nail on wooden sticks before the collapse occurred due to bending moments in the trunk.

The way in which these forces are usually called channels streamed Iintasan style.

Each building must have sufficient force trajectory path to withstand earthquake forces horisosontal.

To provide a clear picture, here we give an example of a simple house with three main points to be discussed, namely the roof structure, wall structure and foundation.

Tips for Choosing Furniture

Furniture is a complement of a dwelling house. to look beautiful and nice place to live then the election becomes a very important thing. If you do intend to buy it, then this job was easy-easy spelled trouble. Need foresight and knowledge quite well with interior design houses.

The first step in choosing the furniture is a ‘survey’ small room in the house. Note the color of the walls, spacious rooms, high ceilings, room accessories and other matters pertaining to the selected theme, such as the classic theme, or Mediterranean, or minimalist, or traditional, Balinese and so forth.

In a large room, you can divide the areas into different areas. Large rooms can provide many options for interior design and furniture design. If too much empty space that can lead to the impression of ‘cold’ at home.

For a narrow space (3 x 3 meter space is narrow enough space), you can use the home furniture that seem light and small. Small designs can provide relief effect in the room. Small space can also be a big impression when there are not many goods and objects large enough wall like a painting or photograph that meets one of the walls.

Furniture design can dipadupadankan with wall color. Ideally, the color is the color matching furniture with paint. When the wall-colored room crane itself, try the color of the furniture ranges in color or monochrome matching crane itself.

Color beige or embedded padannya could become the basis of color. You can also choose the colors more pastel or darker. Better for maximum results, you can use the services of interior designers to organize your space.

For the selection of themes, adjust to the character yourself or your family. A theme reflects the personality of the owner and any arrangement must be consistent. for example, when you are young people who are busy and practical, there are times when you prefer a minimalist design. Certainly not funny when you have a classic chair in a room with minimalist style.

When you buy furniture from a furniture store, of course, in addition to the model, note also durability. Here are some tips for you:

* Always read the instructions that came from a shop window. If you find information that contradicted another furniture store, ignore it and still follow the instructions from the maker of furniture design from the store.
* Furniture furniture into a comfortable place bertumpuknya dirt and dust. This furniture dirt must be removed before the polish. If not cleaned regularly, this dirt will be piled and mixed with a liquid polish so that the more difficult to remove and destroy the layout eventually.
* Wipe the dust on your furniture every week with a soft cloth in the wet. This is to prevent the emergence of goresan.Lalu clean and polish every month.
* For wood furniture, always use protection from hot or cold beverages, and avoid the sun’s damaging heat stroke color and finish. Also do not move anything on it so as not to be scratched.
* Prevent the plant touched the surface of the furniture because kelembabapan dangerous for your tools. Always use a mat that was scratched

Used Cars Online

You are looking for a car for your family but you can’t afford buying a new car. In such situation, buying a used car is an alternative of the new one. However, there are some considerations before buying the used car. You need to check the condition and the price of the car.

The price of used cars is lower than the new one. Somehow, you need to ensure that the car is still in a good condition. When you are searching for the used car, you can go to local car dealers in your area. You can also buy used car online at www.cars-central.com. The cars-central.com is an online car dealer that provides used cars at very low prices. In this site, you can find almost any brands of car. So, no matter what kind of car you are looking for, you will find it in this site.

It is has a huge database of the used cars on the web. So, what are you waiting for? Just go to this site to find the car of your dream. Buy the used car online and save more for the car purchasing. For further information, you can go to this site now.

Practical Guidelines for Building Earthquake Resistant Houses (II)

Loading LEVEL EARTHQUAKE

In 1981, a study to determine the amount of “seismic design load” is already done. This study is a cooperative project between the Government of Indonesia, New Zealand, which produces. Indonesia Earthquake Loads Regulations.

On the concept of these rules there are 2 (two) step approach to calculate the seismic loading may be used.

The first criterion, that the planning of seismic loading such that no damage or damage to the architectural structure every time an earthquake occurred. The second criterion, despite the great earthquake that collapsed but the building should not only be the defects in structures that are not part of or damage to the architecture course. It is known that it is not economical plan for earthquake resistant buildings elastic manner. So for large earthquakes where the possibility of approximately 15% of the age of the building, used for planning a low price and specific plans and measures taken in such details that ensure a certain part of the structure will Ieleh (change shape in a state of plastic) for partially absorb the earthquake energy (which applies to rubbery state). The amount of the price plan charges incurred related to several factors that details contained in the reference, are summarized as follows:

1. Field factor (site)

Figure below, shows six-point earthquake in Indonesia, which determines the basic parameters of loading

Be modified for the calculation of these parameters on soil conditions Iunak where ground shaking caused by the earthquake will be enlarged (through enlargement).

(For Singapore, the zone 4 and above the soft ground plan of the lateral load coefficient is 0.05 for a rigid structure like a low-rise housing.

2. Factor Building

Expenses incurred on a building also depends on the circumstances (features) from the building rersebut, namely flexibility, weight and building materials for construction. Normally a building which fIeksibel will receive a Iebih earthquake load smaller than a more rigid structure. Building a lighter load will menerimna Iebih keciI of seismicity on the weight and building up the firm will absorb the expense of smaller earthquakes from the brittle building in a state where earthquakes will remain elastic impact or sudden collapse. Wooden buildings are classified as a building firm. For wood structures should be planned using the new Indonesian Load Regulation. Plan expense was 33% – 50% of the force that causes the structure has not started or still in a state Ieleh elastic. This reduction was not as great for other building materials, such as steel which has a greater resilience than wood. Nevertheless resilience can be created in the wood structure by using a resilient connector on each element of the relationship structure of the wood. In general, the connection with the nail provides sufficient resilience.

3. Earthquake loading level for Wooden Buildings

By considering the field factor and factor structure, wood structure should still be able to stand up to resist loads as follows: (Jakarta, soft soil)

1. Rubbery wood frame: 0.05 *) x 1.7 = 0.085
2. Wood shear walls: 0.05 *) x 2.5 = 0.125
3.

Wood frame construction reinforced with diagonal bracing rods: 0.05 *) x 3 = 0.15

Note: *) This factor has a maximum price of 0.13 in zone I and 0 in zone 6.

This means, for example a shear wall made of plywood or particle board, should be able to receive a horizontal force of 0.125 x total weight of the structure that overload wall. Although a building direncenakan loading price is right, maybe the building. The quake damaged if some of its main principles were not met.

Home Interior Organizing

Modern minimalist home is still favored the character of the community. Houses like this be the answer to the needs of the community who wanted a house which is simple but its function can be maximized. In addition, modern minimalist house also becomes a solution to limited land, mainly in big cities.

With a house like this pattern, then the function space can be maximized. However, this house requires a different touch and remodeling, especially in terms of planning and interior of the house. It is important that feeling of space can still be felt even though the space is limited.

There are several things to consider in managing the home interior is minimalist, namely:

* Avoid using a permanent room divider. Use insulation to separate rooms will only create the impression narrow. If it is forced to use a partition, choose a temporary nature or accessories only. Function only to separate between the room and not restrictive.
* The principle of minimalist design is perfect, fitting, and not excessive. Therefore, choose the form of a clean room accessories, firmly, without a profile, and minimal geometric shapes.
* Selection of house paint, you should use bright colors and minimalist. Give accent by using two-color games that intentionally ‘crashed’ to remove the impression of monotony.
* Frame door and window, we recommend using a dark-colored wood with no profile. It would be better if using aluminum frames for more precision.
* If you use the staircase railing and trellis, choose a simple motive was without ornament ‘weight’ as a motive bunga-bunga/suluran. The combination of horizontal lines and vertical railing, is one of the characteristics of a minimalist home interior.
* Choose the type of roller shutters, basic, both vertical or horizontal blinds
* Lighting can use the model down light, hid lamp, and round hanging lamp, boxes, or prism.
* The use of furniture such as tables and chairs selected the simpler model and finish wearing a dark brown color and black and color accents. Options tables can be made of glass to create the impression of light.
* For the sofa, use a simple box-shaped model without too many accents. Plihan colors can use dark colors or bright colors that combined a dark color. To cushion sofa should wear matching colors with the sofa.
* If you use a carpet floor, choose a solid color without a motive.
* Avoid the impression of ‘full’ in the room by limiting the amount of furniture sparingly. If you like the painting, choose a simple color composition of the painting with a framed box, without let alone carving profile.
* Options interior home accessories should be selected form a unique-shaped sculpture, glass, artistic glass, or candle holder. Limit the number of accessories in order to avoid the impression of ‘full’ like the points above.
* For the bedroom, choose bright colors for the walls. If you want to use an accent, wear an accent which is usually behind the headboard of the bed. Whereas if you use the wallpaper, choose the model of wicker or bamboo leaves. Choose a simple style bed and adjust the size of existing rooms. Do not connect the bed is too big because will make a limited space.
* To create beautiful shades of minimalist home interior, create a tiny garden from exposure to combinations of natural stones, small plants and the active pool

Practical Guidelines for Building Earthquake Resistant Houses (I)

INTRODUCTION

Indonesia’s territory includes areas that have a high level of earthquake risk earthquake areas diseIuruh among some of the world.

The last data successfully recorded shows that on average every ten tehun happen earthquake activity that resulted in substantial damage in Indonesia. Most occur in the offshore area and partly in a residential area (to see the event of an earthquake on this day of the week click here or click here) On a fairly dense residential area, there should be a protection to reduce population mortality and severe damage caused by shocks earthquake.

By using proper engineering principles, construction details and practical both the property loss can be reduced and the soul of Man.

In this Webblog, outlined the basic factors of the earthquake shock which was then in describing the main principles to be used in building earthquake resistant houses.

SOME CHARACTERISTICS OF EARTHQUAKE shocks

At the location of buildings, earthquakes will cause the soil under the building and shaking and moving around in irregular (random). Ground acceleration occurs in three dimensions to form combinations of vibration frequency of 0.5 Hertz sampal 50 Hertz. If the building rigid (fixed) on the ground (and can not be altered) inertial forces which resist the acceleration of the ground will work on each element of the building structure during an earthquake occurs. The magnitude of this inertia forces depending on the weight of the building, the more light means less inertia forces at work in these structural elements.

Responsibility as people who dive Emitter building construction industry is such that the building is still capable of standing withstand the forces of inertia. The question that arises then, “What is the strength of buildings do we need?”.

Furniture Care Tips

Antique furniture in a dwelling can certainly increase the value of the house interior. Honestly, old furniture decades ago this could be the pride well as an investment for the owner. Especially if the furniture is well cared for, will certainly look more beautiful and durable.

In fact, it could be the antiquities are not purely generated by the crafters of furniture today. It is not possible with antique furniture has been around since tens of years to hundreds of years ago.

It was natural that when you find it, there are some defects or damage to the furniture, so the craftsmen improve it and re-painted and ready for re-use. Surely they sell to the market or auction. That is why, antique furniture were targeted because of poaching of the collector design, color, function and value. Therefore, an antique shop has always been a target of collectors.

However, to find antique furniture in accordance with the desires and needs in a home is not as easy as one might imagine. Could be, have difficulty getting a table or a chair that was auctioned at a price high enough but it was not fitting is placed in your room. In another story, you are fortunate enough to inherit parents’ dresser antique relics. Unfortunately this table does not last long because you do not know how to take care of him.

Environmental influences such as weather changes, humidity, dust, etc., are used when bought furniture is so beautiful now become dull such as loss of “aura”. There are many ways to maintain the aura is still good. One is the pattern of care is good and right, which are as follows:

* Suck or Blow

To remove dust, use a brush, vacuum cleaner or a small compressor. Avoid the use of a lap. Use of lap often leads to scratches on the furniture surface. Perform periodic cleaning of dust.

* Buy a layer of wax.

After all the dust left out spray coating of furniture wax or liquid nurses. Wax can be purchased at the hardware store, paint or supermarket. There are many brands on offer. Flatten the liquid that has been sprayed with a cloth (preferably cotton memakain / T) dry.

* See Results

Wait a few minutes. After that lap with the other dry cotton cloth. You will see for yourself the results. Furniture looks clean and shiny. Layer of wax will protect the surface from dust and scratches immediately.

* Perform routine maintenance once a week. For daily, just your furniture surface with a broom duster (feather) evenly.
* For the grill, wipe with a soft brush.
* Replace pillow or chair seat regularly.
* Place the water hyacinth furniture in a dry place and adequate ventilation.
* Keep the color of antique furniture to keep him away from direct sunlight and in a long time.

Know The Art of Matting

Matting is the art of knitting is usually used material from bamboo, rattan, leaves having fibers which can be diluted (water hyacinth, palm leaves, pandanus leaves, etc.) and plastics. He is widely used as a household appliance daily. This art is usually treated with a device that is still as simple as cutting blades, knives penipis, pliers, and pliers round grouse, which require kretivitas high, ideas, thoughts and feelings of handicraft.

Matting is an art tradition that was thousands of years on this earth. Historical development in the archipelago together with the development of art pottery. Type in the Neolithic period (during planting) resulted mostly in the form of roots and rope made of rattan.

In the industrial world, usually made of wicker work of applied art, ie art which has a direct connection with human life, considering the applied arts in daily life has a meaning to human beings and more emphasis gunanaya functions without leaving the function of aesthetic value or beauty.

Has three types, namely:

1. Flat webbing, made wide and flat washers. This type of craft used for mats, walls of traditional houses, and other room divider.

2. Matting three-dimensional, tangible three-dimensional objects a craft product. This craft has grown not only in the form of traditional crafts but has expanded its product and the more valuable species such as sandals, chairs, lanterns light the bag, and place the container.

3. Makrame knot knot art materials with skill only with the aid of hand tools that function like a needle hook. In makrame arts, knot knot material is the main technique for creating a connection in the form of a craft. Some of the crafts that use techniques such makrame tablecloth, dress coats, kesetkaki, and souvenirs.

Rushes woven handicraft products is a type of craft that is experiencing increasing demand, both domestic demand and overseas. Domestic demand, especially from big cities like Jakarta, Bandung, and Bali. While overseas, the demand coming from Japan, the Netherlands, Australia, Middle East and Malaysia.

Constraints most felt in the business of crafting these rushes are the raw materials are not sufficient to fill orders. To meet the need of raw material, raw material makers seeking to Central Java to East Java.

Woven pandanus handicraft handicraft business much the same with mending. Pandanus handicraft production process is done by using a simple tool that is very easily done by anyone, including mothers-housewives.

Procurement of production inputs and raw materials pandanus handicraft pursued by the craftsmen. Raw materials and supplementary pandanus handicraft industry which is used by the craftsmen are: woven pandanus, fabric, sewing thread, buttons coconut shell, glue, dyes / lustres, varnishes, resluiting, mines, and cardboard.

Most products woven pandanus bags and semi-finished products demanded by consumers from Japan and Europe. Products made from pandanus basis, much in demand by consumers mancanagara, relating to the nature of the easily recyclable products (renewable). Rubbish product raw material does not interfere with the function of pandanus environment.

A great euphonious in every box